Union AlSi 12
Union AlSi 12
Ürünlere geri dön
Union Al 99,7
Union Al 99,7
Union 99,5 Ti (solid) - Görsel 1
Union 99,5 Ti (solid) - Görsel 2
Büyütmek için tıklayın
Union 99,5 Ti (solid)
Union 99,5 Ti (solid) - Görsel 2

Union 99,5 Ti (solid)

Is a pure aluminium welding wire for joining and surfacing of aluminium materials according to EN ISO 18273. It is a welding consumable with Ti for grain refinement and weldable in all positions.

İstek listesine ekle
Kategoriler:
Açıklama
Normları:  EN ISO 18273 – S Al 1450 (Al99,5Ti)
AWS A5.10 / SFA-5.10 – ER1450
Kaynak Metalinin Bileşimi % (Tipik) Si Mn Ti Fe Cu Al Mg Zn Cr Zr V Be Diğer
< 0,25 < 0,15 < 0,4 min. 99,5
Mekanik Değerler: Akma Dayanımı (MPa) 20
Çekme Dayanımı (MPa) 65
Yüzde Uzama, A5,(%) 35
Çentik Darbe Dayanımı (j/cm2
)
Diğer Bilgiler

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Union 99,5 Ti (solid)” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Union Al 99,7

Aluminium solid wire for welding of very pure aluminium materials according to EN ISO 18273 for applications in electro technical and mechanical construction, food and chemical industry.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlMg 2,7 Mn 0,8

Solid wire for GTAW of AlMg alloys. The limited Mg-content of max. 2,8% to obtain intergranular corrosion resistance. Seawater resistant. Recommended for high-temperature applications. For obtaining near-matching coloured joints where anodizing is required.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlMg 2,7 Mn 0,8

Rods for GTAW of AlMg alloys. Mg-content max. 2,8% to obtain intergranular corrosion resistance. Seawater-resistant weld metal. For obtaining near-matching coloured joints where anodizing is required. Pre-heating 150°C for plates > 15 mm.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlMg 5

Solid wire for AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Good colour matching with base metal after anodizing. Thorough cleaning of the workpiece bevels is necessary. Thicker plate materials require preheating to 150°C.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlMg 5 Mn Ti

Solid wire for GMAW of AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Susceptible to stress corrosion cracking if exposed to service temperatures > 65°C. Good colour matching with base metal after anodizing. The welding consumable contains Ti for grain refinery. Thorough cleaning of the workpiece bevels is necessary prior to welding.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlSi 10 Cu 4

Rod for GTAW of AlCu alloys. Low melting point and excellent penetration characteristics. Provides superior wetting characteristics compared to Union AlCu 6 Mn when welding AlCu alloys, the strength, on the other hand, is lower. Superior resistance to stress corrosion cracking where high-temperature properties are required. The weld metal is not suitable for anodizing for decorative purposes. Thorough cleaning of the workpiece bevels is necessary prior to welding.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlSi 5

Rods for GTAW of AlSi containing up to 5% Si. Oxyacetylene welding respectively brazing with suitable fl uxes possible. The weld metal is not suitable for anodizing for decorative purposes. Very fl uid weld pool. Base material should be cleaned near the seam. Pre-heating 150 - 200°C for plates > 15 mm. Do not use for welding hardenable alloys is highly stressed zones.

İstek listesine ekle
Devamını oku
Hızlı görünüm

Union AlSi 7 Mg

Union AlSi 7 Mg is a modified 4010 alloy (alloy 4008) with low levels of impurities, specially designed for joining or repairing 7% Si aluminium cast components like 356.0, A356.0 and A357.0. The mechanical properties can be increased by heat treatment. Thorough cleaning of the workpiece bevels is necessary prior to welding.

İstek listesine ekle
Devamını oku
Hızlı görünüm