TIGROD 430LNb
TIGROD 430LNb
Back to products
UTP 49
UTP 49
Click to enlarge

UTP 48

UTP 48 contains 12% Si for welding of aluminium alloyed with copper, silicon, and magnesium. Also excellent for joining dissimilar grades of aluminium. Unique self-lifting slag. Pure white coating outlasts conventional products in moisture resistance. Available in hermetically sealed aluminium tins.

Add to wishlist
Kategoriler:
Açıklama
Normları: EN ISO 18273 – E Al 4047 (AlSi12)
Kaynak Metalinin Bileşimi % (Tipik) Si Mn Ti Fe Cu Al Mg Zn Cr Zr V Be Diğer
11,8 0,04 0.Oca 0,8 0,23 bakiye 0,04 0,08
Mekanik Değerler: Akma Dayanımı (MPa) 80
Çekme Dayanımı (MPa) 180
Yüzde Uzama, A5,(%) 5
Çentik Darbe Dayanımı (j/cm2
)
Diğer Bilgiler

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“UTP 48” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Union AlSi 12

Is used for aluminium-silicium casting alloy with a Si-content up to 12%. Good mechanical characteristics, excellent corrosion resistance and a low melting point ensure high-quality welding results.
Add to wishlist
Quick view

Union AlMg 2,7 Mn 0,8

Solid wire for GTAW of AlMg alloys. The limited Mg-content of max. 2,8% to obtain intergranular corrosion resistance. Seawater resistant. Recommended for high-temperature applications. For obtaining near-matching coloured joints where anodizing is required.
Add to wishlist
Quick view

Union AlMg 3

Solid wire for AlMg alloys containing up to 3% Mg. Seawater-resistant weld metal. Good colour matching with base metal after anodizing. Thorough cleaning of the workpiece bevels is necessary. Thicker plate materials require preheating to 150°C.
Add to wishlist
Quick view

Union AlMg 5 Mn Ti

Solid wire for GMAW of AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Susceptible to stress corrosion cracking if exposed to service temperatures > 65°C. Good colour matching with base metal after anodizing. The welding consumable contains Ti for grain refinery. Thorough cleaning of the workpiece bevels is necessary prior to welding.
Add to wishlist
Quick view

Union Al 99,7

Aluminium solid wire for welding of very pure aluminium materials according to EN ISO 18273 for applications in electro technical and mechanical construction, food and chemical industry.
Add to wishlist
Quick view

Union AlMg 5

Solid wire for AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Good colour matching with base metal after anodizing. Thorough cleaning of the workpiece bevels is necessary. Thicker plate materials require preheating to 150°C.
Add to wishlist
Quick view

Union AlMg 5

Rods for GTAW of AlMg containing up to 5 % Mg. Seawater-resistant weld metal. Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mm.
Add to wishlist
Quick view

Union AlSi 5

Rods for GTAW of AlSi containing up to 5% Si. Oxyacetylene welding respectively brazing with suitable fl uxes possible. The weld metal is not suitable for anodizing for decorative purposes. Very fl uid weld pool. Base material should be cleaned near the seam. Pre-heating 150 - 200°C for plates > 15 mm. Do not use for welding hardenable alloys is highly stressed zones.
Add to wishlist
Quick view