Union AlSi 12
Union AlSi 12
Back to products
Union Al 99,7
Union Al 99,7
Click to enlarge

Union 99,5 Ti (solid)

Is a pure aluminium welding wire for joining and surfacing of aluminium materials according to EN ISO 18273. It is a welding consumable with Ti for grain refinement and weldable in all positions.

Add to wishlist
Kategoriler:
Açıklama
Normları:  EN ISO 18273 – S Al 1450 (Al99,5Ti)
AWS A5.10 / SFA-5.10 – ER1450
Kaynak Metalinin Bileşimi % (Tipik) Si Mn Ti Fe Cu Al Mg Zn Cr Zr V Be Diğer
< 0,25 < 0,15 < 0,4 min. 99,5
Mekanik Değerler: Akma Dayanımı (MPa) 20
Çekme Dayanımı (MPa) 65
Yüzde Uzama, A5,(%) 35
Çentik Darbe Dayanımı (j/cm2
)
Diğer Bilgiler

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Union 99,5 Ti (solid)” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Union AlMg 4,5 Mn Zr

Zirconium micro-alloyed aluminium TIG rod. The weld metal is uncritical in terms of hot cracks. Suitable especially for complicated welding constructions with critical tensions. Base material should be cleaned near the seam. Pre-heating 150°C for plates > 15 mm.
Add to wishlist
Quick view

Union AlMg 2,7 Mn 0,8

Solid wire for GTAW of AlMg alloys. The limited Mg-content of max. 2,8% to obtain intergranular corrosion resistance. Seawater resistant. Recommended for high-temperature applications. For obtaining near-matching coloured joints where anodizing is required.
Add to wishlist
Quick view

Union AlSi 7 Mg

Union AlSi 7 Mg is a modified 4010 alloy (alloy 4008) with low levels of impurities, specially designed for joining or repairing 7% Si aluminium cast components like 356.0, A356.0 and A357.0. The mechanical properties can be increased by heat treatment. Thorough cleaning of the workpiece bevels is necessary prior to welding.
Add to wishlist
Quick view

Union AlSi 12

Is used for aluminium-silicium casting alloy with a Si-content up to 12%. Good mechanical characteristics, excellent corrosion resistance and a low melting point ensure high-quality welding results.
Add to wishlist
Quick view

Union AlMg 4,5 Mn

Solid wire for GMAW and GTAW of AlMg alloys. The weld metal is resistant to seawater. Base material should be cleaned near the seam. Pre-heating 150°C for plates > 15 mm.
Add to wishlist
Quick view

Union AlMg 3

Rods for GTAW of AlMg containing up to 3% Mg. Seawater-resistant weld metal. Good colour matching with base metal after anodizing. Base material should be cleaned near the seam. Pre-heating 150°C for plates > 15 mm.
Add to wishlist
Quick view

Union 99,5 Ti (TIG)

Pure aluminium welding rod for joining and surfacing of aluminium with a maximum of 0.5% of alloyed elements. The welding consumable contains Ti for grain refinery. Base material should be cleaned near the seam.
Add to wishlist
Quick view

Union Al 99,7

Aluminium solid wire for welding of very pure aluminium materials according to EN ISO 18273 for applications in electro technical and mechanical construction, food and chemical industry.
Add to wishlist
Quick view