EX-TRAFIRE 125 HD Plasma Cutting Machine
Original price was: €9.870,00.€7.980,00Current price is: €7.980,00.
The EX-TRAFIRE 125 HD is a portable plasma cutting machine capable of precise cuts up to 40 mm in continuous cutting and up to 60 mm in intermittent cutting.
With the appropriate equipment, a CNC plasma cutting machine can also be used as a power unit.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.
EX-TRAFIRE 125 HD Key Features
It can cut up to 60 mm.
It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving in systems that use a manual plasma cutting machine.
Because the compressed air regulator and air filter are located inside the machine, it can accommodate fluctuations in air pressure.
It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving on manual systems.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Can be used with automation systems (with optional accessories).
Complies with CE safety standards.
Complies with CE safety standards.
EX-TRAFIRE 125 HD Key Features
The EX-TRAFIRE 125 HD is a portable plasma cutting machine capable of precise cuts up to 40 mm in continuous cutting and up to 60 mm in intermittent cutting.
With the appropriate equipment, a CNC plasma cutting machine can also be used as a power unit.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.
It can cut up to 60 mm.
It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving in systems that use a manual plasma cutting machine.
Because the compressed air regulator and air filter are located inside the machine, it can accommodate fluctuations in air pressure.
It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving on manual systems.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Can be used with automation systems (with optional accessories).
Complies with CE safety standards.
Complies with CE safety standards.
General Features
- Modes: 20–125 A
- Modes: Cutting, grid cutting, gouging, marking
- Duty Cycle (@ 40°C): 100% @ 125 A
- Nominal Output Voltage: 200 VDC (boosted to 235 V)
- Blasting Capacity: 60 mm+
- Maksimum Kesme Kapasitesi: 25 mm
- Recommended Cutting Capacity: 165 mm
- Material Removal Rate During Machining: 12.5 kg/hour+
- Plasma Gas: Compressed air, nitrogen, argon (for marking)
- Required Air Flow: 205 lpm @ 5 bar
- CNC Interface: CAN, RS-485, RS-422 (optional)
- Preset Voltage Division Ratio: 50:1
Elektriksel & Mekanik Özellikler
- Input Voltage: 3×400 VAC ± 15%
- Frequency: 50/60 Hz
- Dimensions (W×H×D): 613×515×302 mm
- Certifications: 35.4 kg
- Weight: CE, CCC, C-TICK, CSA (depending on the region)
- Maximum Inlet Pressure: 560 × 265 × 400 mm
- Protection Level: Open-Circuit Voltage
- Cable Options: F
Plasma Cutting Torch Features
- Makine Torcu: FHT-EX®125TTH
- Weight (Machine Torque): FHT-EX®125TTM
- Standard Length: 5 m / 8 m / 15 m / 23 m
- Weight (El Torcu):
- 5 m: 2.5 kg
- 8 m: 3.3 kg
- 15 m: 5 kg
- 23 m: 7.9 kg
- Plasma Cutting Temperature:
- 5 m: 2.1 kg
- 8 m: 3.4 kg
- 15 m: 5.7 kg
- 23 m: 8 kg
Nominal Akım & Çalışma Döngüsü:
- Processing Steps: -10°C to +40°C
- Taşıma & Depolama Sıcaklığı: -25°C to +55°C
- Gas Flow Rate: Up to 90% at 20°C
- Relative Humidity: Cutting, slitting, engraving, marking
- Type of Use: Manual and mechanized
- Nominal Akım & Çalışma Döngüsü: 125 A / 100%
- Gas Type:
- 100–125 A → 156 l/min @ 4.8 bar
- 75–85 A → 101 L/min @ 5.2 bar
- 55–65 A → 87 l/min @ 5.2 bar
- 45 A → 82 l/min @ 5.2 bar
- Milling 100–125 A → 205 l/min @ 5.0 bar
- Oyma 100-105 A → 205 l/dk @ 5.0 bar
- Label 10–16 A → 39 l/min @ 2.4 bar
Maximum Particle Size:
- Recommended Air Quality: ISO 8573-1 Class 1.2.2
- Maximum Oil Content: 0.1 micron
- Maximum Freezing Point: 0.1 mg/m³
- Purity: +3°C
- Values ≥ 99.99%
- heavy-duty industrial applications Clean, moisture-free, oil-free
Bu makine, Technical Specifications için tasarlanmış olup high performance, flexibility, and cost-effectiveness sunarak hem manuel hem de CNC operasyonları için ideal bir çözümdür.
| Technical Specifications | Values |
| Input Voltage | 3-phase, 400 V ±15% |
| 45 A delayed | 20–45 A |
| Required Inlet Air Pressure | 6.0bar – 7.5bar |
| Required Air Flow Rate | 205 l/dak ( 5bar’da) |
| Covered Electrode (SMAW) | 100% D.K.O. 125 A |
| Pilot Back Current | 30–125 A |
| 160V DC Open circuit voltage | |
| 10 Amps | Part Number |
| Cutting Capacity | FHT-EX105TTH Manual Torch Consumables |
| Machine Dimensions (L x W x H) mm | 613 x 515 x 302 |
FHT-EX125TTH Manual Torch Consumables |
|||
| No | Package Contents (Quantity) | Definition | Electrode |
| 1 | EX-6-404-021 | Nozzle 30A (0.8 mm) | 1 |
| 2 | EX-6-401-021 | Electrode 45–125 A | 5 |
| 3 | EX-6-409-021 | External Nozzle 125 A | 5 |
| 4 | EX-5-415-051 | Protective Helmet 105A | 1 |
| 5 | EX-6-419-021 | Groove-Cutting Nozzle 125A | 1 |
| 6 | EX-6-440-020 | Groove Cutting, External Nozzle, High Metal Removal | 5 |
| 7 | EX-6-440-024 | EX-6-440-024 | 1 |
| Weight | 35,4 kg |
|---|---|
| Dimensions | 613 × 515 × 820 cm |
Related products
Böhler URANOS NX 2200 PMC
The EX-TRAFIRE 105 HD is a portable, handheld plasma cutting machine—a CNC plasma cutter—capable of precise cutting up to 35 mm in continuous mode and up to 50 mm in intermittent mode.
Thanks to the FHT-EX105TTH series torches, developed for heavy-duty industrial applications, electrode and nozzle consumption is significantly lower than that of comparable products.
Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.
EX-TRAFIRE®105 HD Key Features
A 3 (three)-year warranty on parts and labor.
Because the compressed air regulator and air filter are located inside the machine, it can accommodate fluctuations in air pressure.
Thanks to the FHT-EX105TTH series torches, the consumption of consumables such as electrodes and nozzles is significantly lower compared to equivalent machines.
It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving on manual systems.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Can be used with automation systems (with optional accessories).
Complies with CE safety standards.
Complies with CE safety standards.
EX-TRAFIRE 100SD Plasma Cutting Machine
The EX-TRAFIRE 100SD is a high-performance plasma cutting machine designed for both manual and CNC cutting operations.
Thanks to the FHT-EX105TTH series torches, developed for heavy-duty industrial applications, electrode and nozzle consumption is significantly lower than that of comparable products.
Thanks to the easily accessible compressed air regulator, fluctuations in air pressure can be accommodated.
The system, which is also capable of plasma grooving, features a machine capable of cutting up to 50 mm; in continuous cutting mode, it can cut up to 35 mm. The specially designed FHT-EX®105TT plasma torch offers high cutting performance and a highly ergonomic design. The EX-TRAFIRE 100 SD can also be used with compatible equipment in CNC cutting systems.
EX-TRAFIRE®100 SD Key Features
Power output of up to 100 amperes is available.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Complies with CE safety standards.
Complies with CE safety standards.
EX-TRAFIRE 40SD Manual Plasma Cutting Machine
The EX-TRAFIRE®40SD is a lightweight series plasma cutting machine designed for manual cutting operations. Capable of cutting up to 20 mm, the machine can cut 12 mm in continuous cutting mode. Thanks to the coaxial cable used in the specially designed FHT-EX®40H, the plasma torch is very lightweight and ergonomic. The EX-TRAFIRE 40SD can also be used with compatible equipment in CNC cutting systems.
EX-TRAFIRE®40SD Key Features
It can operate on single-phase electricity and has a power output of up to 40 amperes.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Complies with CE safety standards.
Complies with CE safety standards.
EX-TRAFIRE 45HD Handheld Plasma Cutter
EX-TRAFIRE®45HD is a manual plasma cutting machine developed by Thermacut for heavy-duty industrial applications, capable of cutting up to 12 mm in continuous cutting and up to 25 mm in intermittent cutting.
Thanks to the FHT-EX45TTH series torches, developed for heavy-duty industrial applications, electrode and nozzle consumption is significantly lower than that of comparable products.
Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.
EX-TRAFIRE®45HD Key Features
Three-phase models can cut up to 25 mm
Because the compressed air regulator and air filter are located inside the machine, it can accommodate fluctuations in air pressure.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper. Can be used with automation systems (with optional accessories).
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Can be used with automation systems (with optional accessories).
Complies with CE safety standards.
Complies with CE safety standards.
EX-TRAFIRE 55SD Plasma Cutting Machine
The EX-TRAFIRE 55SD Plasma Cutting Machine can also be used with the appropriate equipment in my CNC cutting systems.
The FHT-EX®105TT plasma torch, with its custom design, offers high cutting performance and features a highly ergonomic design.
The system, which is also capable of plasma grooving, can cut up to 30 mm; in continuous cutting mode, the machine can cut up to 20 mm.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
EX-TRAFIRE55SD Plasma Cutting Machine Key Features
A 3 (three)-year warranty on parts and labor.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Complies with CE safety standards.
Complies with CE safety standards.
EX-TRAFIRE 75SD Plasma Cutting Machine
It can operate on single-phase electricity and has a power output of up to 30 amperes.
EX-TRAFIRE®30H Key Features
Thanks to the easily accessible compressed air regulator, fluctuations in air pressure can be accommodated.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Complies with CE safety standards.
Complies with CE safety standards.
Lincoln Electric Tomahawk 1025
It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving on manual systems.
Thanks to the FHT-EX105TTH series torches, the consumption of consumables such as electrodes and nozzles is significantly lower than that of comparable machines
Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.
EX-TRAFIRE 85HD Plasma Cutting Machine Key Features
It can cut up to 45 mm.
Because the compressed air regulator and air filter are located inside the machine, it can accommodate fluctuations in air pressure.
Thanks to the FHT-EX105TTH series torches, the consumption of consumables such as electrodes and nozzles is significantly lower than that of comparable machines
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper. Can be used with automation systems (with optional accessories).
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Can be used with automation systems (with optional accessories).
Complies with CE safety standards.
Complies with CE safety standards.
Lincoln Electric Tomahawk 1538
Tomahawk 1025 hafif ve orta ağır uygulamalar için geliştirilmiş 25 mm’ye kadar çelik malzemelerde plazma kesme işlemi yapabilen bir makinedir. Makine küçük ölçüleri ve kesim çıkış amperine rağmen oldukça karaklı çalışan bir makinedir. 20 mm’ye kadar patlatma ile malzme ortasından başlayarak kesim yapabilmektedir. Pek çok diğer plazma sisteminde bu değer 14-15 mm civarında kalırken Tomahawk 1025 kalın parçaların kesim işleminde dahi ihtiyaç anında yardımınıza koşacaktır.
Makine tasarımında soğutma kapasitesini arttırmak için kullanılan tünel teknolojisi sayesinde akım üreteci olan elektronik elemanların iyi derecede soğutulması sağlanırken, toz ve neme maruz kalmaması gereken diğer elektronik kart ve hassas parçalar soğutucu hava akışının neden olabileceği kirlenmelere karşı korunmuştur.
Jeneratörler ile kullanıma uygundur. Geliştirilmiş ve patentli özel plazma kesim torcu sayesinde yüksek frekans olmaksızın plazma arkı başlatılabilir. Özel soğutma sistemi sayesinde ve yüksek frekanssız başlangıç sayesine elektrod ve meme tüketimi azaltılmıştır.
Tomahawk 1538 Key Features
Yüksek kesme hızı (8 mm Aluminyumda 2000 mm/dak kesim hızı)
Basınçlı hava regülatörü ve hava filtresi makine içerisindedir.
Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.
Özel tasarımlı torç sayesinde plazma arkı yoğunlaştırılmıştır ve bu sayede düşük ısı girdisi sağlayarak çarpılma riskini ve çarpılmaları en aza indirir.
Can be used with automation systems (with optional accessories).
Complies with CE safety standards.
Complies with CE safety standards.
Reviews
There are no reviews yet.