Böhler URANOS NX 2200 PMC

Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.

With the appropriate equipment, a CNC plasma cutting machine can also be used as a power unit.

Thanks to the FHT-EX105TTH series torches, developed for heavy-duty industrial applications, electrode and nozzle consumption is significantly lower than that of comparable products.

Thanks to a special electronic circuit design capable of tolerating the system’s input voltage, these units can be used with generators and on construction sites with long power cables.

EX-TRAFIRE®105 HD Key Features

A 3 (three)-year warranty on parts and labor.

It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving in systems that use a manual plasma cutting machine.

Thanks to the FHT-EX105TTH series torches, the consumption of consumables such as electrodes and nozzles is significantly lower than that of comparable machines

It can perform all CNC cutting, marking, and intermittent cutting operations—including marking—as well as plasma grooving on manual systems.

Cutting can be performed on many electrically conductive metals, such as low-alloy steel, stainless steel, aluminum, and copper.

Can be used with automation systems (with optional accessories).

Complies with CE safety standards.

Complies with CE safety standards.

General Features

• Modes: 20-105 A
• Modes: Cutting, grid cutting, gouging, marking
• Duty Cycle (@ 40°C): 100% @ 105 A
• Nominal Output Voltage: 200 VDC (boosted to 235 V)
• Blasting Capacity: 55 mm+
• Maksimum Kesme Kapasitesi: 25 mm
• Recommended Cutting Capacity: 38 mm
• Material Removal Rate During Machining: 9 kg/saat+
• Plasma Gas: Compressed air, nitrogen, argon (for marking)
• Required Air Flow: 205 lpm @ 5 bar
• CNC Interface: CAN, RS-485, RS-422 (optional)
• Preset Voltage Division Ratio: 50:1

Elektriksel & Mekanik Özellikler

• Input Voltage: 3×400 VAC ± 15%
• Frequency: 50/60 Hz
• Dimensions (W×H×D): 613×515×302 mm
• Certifications: 35.4 kg
• Weight: CE, CCC, C-TICK, CSA (depending on the region)
• Maximum Inlet Pressure: 560 × 265 × 400 mm
• Protection Level: Open-Circuit Voltage
• Cable Options: F

Plasma Cutting Torch Features

• Makine Torcu: FHT-EX®105TTH
• Weight (Machine Torque): FHT-EX®105TTM
• Standard Length: 5 m / 8 m / 15 m / 23 m
• Weight (El Torcu):
  • 5 m: 2.5 kg
  • 8 m: 3.3 kg
  • 15 m: 5 kg
  • 23 m: 7.9 kg
• Plasma Cutting Temperature:

• 5 m: 2.1 kg
• 8 m: 3.4 kg
• 15 m: 5.7 kg
• 23 m: 8 kg

Nominal Akım & Çalışma Döngüsü:

• Processing Steps: -10°C to +40°C
• Taşıma & Depolama Sıcaklığı: -25°C to +55°C
• Gas Flow Rate: Up to 90% at 20°C
• Relative Humidity: Cutting, slitting, engraving, marking
• Type of Use: Manual and mechanized
• Nominal Akım & Çalışma Döngüsü: 105 A / %100
• Gas Type:

• 100-105 A → 156 l/dk @ 4.8 bar
• 75–85 A → 101 L/min @ 5.2 bar
• 55–65 A → 87 l/min @ 5.2 bar
• 45 A → 82 l/min @ 5.2 bar
• Oyma 100-105 A → 205 l/dk @ 5.0 bar
• Oyma 100-105 A → 205 l/dk @ 5.0 bar
• Label 10–16 A → 39 l/min @ 2.4 bar

Maximum Particle Size:

• Recommended Air Quality: ISO 8573-1 Class 1.2.2
• Maximum Oil Content: 0.1 micron
• Maximum Freezing Point: 0.1 mg/m³
• Purity: +3°C
• Values ≥ 99.99%
• heavy-duty industrial applications Clean, moisture-free, oil-free

Bu makine, Technical Specifications için tasarlanmış olup high performance, flexibility, and cost-effectiveness sunarak hem manuel hem de CNC operasyonları için ideal bir çözümdür.