Union AlMg 4,5 Mn Zr
Union AlMg 4,5 Mn Zr
Back to products
Union AlMg 5 Mn (solid)
Union AlMg 5 Mn (solid)
Click to enlarge

Union AlMg 5

Solid wire for AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Good colour matching with base metal after anodizing. Thorough cleaning of the workpiece bevels is necessary. Thicker plate materials require preheating to 150°C.

Add to wishlist
Kategoriler:
Açıklama
Normları: EN ISO 18273 – S Al 5356 (AlMg5Cr(A))
AWS A5.10 / SFA-5.10 – ER5356
Kaynak Metalinin Bileşimi % (Tipik) Si Mn Ti Fe Cu Al Mg Zn Cr Zr V Be Diğer
< 0,25 0,05-0,2 0,06-0,2 < 0,4 < 0,1 bakiye 4,5-5,5 < 0,1 0,05-0,2
Mekanik Değerler: Akma Dayanımı (MPa) 110
Çekme Dayanımı (MPa) 240
Yüzde Uzama, A5,(%) 17
Çentik Darbe Dayanımı (j/cm2
)
Diğer Bilgiler

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Union AlMg 5” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Union AlMg 5 Mn (TIG)

Rod for GTAW of AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Susceptible to stress corrosion cracking if exposed to service temperatures > 65°C. Good colour matching with base metal after anodizing. Thorough cleaning of the workpiece bevels is necessary prior to welding.
Add to wishlist
Quick view

Union AlMg 4,5 Mn Zr

Zirconium micro-alloyed aluminium wire. The weld metal is uncritical in terms of hot cracks. Suitable especially for complicated welding constructions with critical tensions. Base material should be cleaned near the seam. Pre-heating 150°C for plates > 15 mm.
Add to wishlist
Quick view

UTP 48

UTP 48 contains 12% Si for welding of aluminium alloyed with copper, silicon, and magnesium. Also excellent for joining dissimilar grades of aluminium. Unique self-lifting slag. Pure white coating outlasts conventional products in moisture resistance. Available in hermetically sealed aluminium tins.
Add to wishlist
Quick view

Union Al 99,7

Aluminium solid wire for welding of very pure aluminium materials according to EN ISO 18273 for applications in electro technical and mechanical construction, food and chemical industry.
Add to wishlist
Quick view

Union AlMg 2,7 Mn 0,8

Solid wire for GTAW of AlMg alloys. The limited Mg-content of max. 2,8% to obtain intergranular corrosion resistance. Seawater resistant. Recommended for high-temperature applications. For obtaining near-matching coloured joints where anodizing is required.
Add to wishlist
Quick view

Union AlMg 4,5 Mn

Solid wire for GMAW and GTAW of AlMg alloys. The weld metal is resistant to seawater. Base material should be cleaned near the seam. Pre-heating 150°C for plates > 15 mm.
Add to wishlist
Quick view

Union AlSi 12

Rods for GTAW of AlSi containing more than 10% Si. Very fluid weld pool. The weld metal is not suitable for anodizing. Pre-heating 150 – 200°C for plates > 15 mm.
Add to wishlist
Quick view

Union AlSi 7 Mg

Union AlSi 7 Mg is a modified 4010 alloy (alloy 4008) with low levels of impurities, specially designed for joining or repairing 7% Si aluminium cast components like 356.0, A356.0 and A357.0. The mechanical properties can be increased by heat treatment. Thorough cleaning of the workpiece bevels is necessary prior to welding.
Add to wishlist
Quick view