| Normları: | EN ISO 18273 – S Al 1070 (Al99,7) AWS A5.10 / SFA-5.10 – ER1070 |
||||||||||||
| Kaynak Metalinin Bileşimi % (Tipik) | Si | Mn | Ti | Fe | Cu | Al | Mg | Zn | Cr | Zr | V | Be | Diğer |
| < 0,2 | < 0,03 | < 0,25 | min 99,7 | ||||||||||
| Mekanik Değerler: | Akma Dayanımı (MPa) | 20 | |||||||||||
| Çekme Dayanımı (MPa) | 65 | ||||||||||||
| Yüzde Uzama, A5,(%) | 35 | ||||||||||||
| Çentik Darbe Dayanımı (j/cm2 ) |
|||||||||||||
Union Al 99,7
Aluminium solid wire rod for welding of very pure aluminium materials according to EN ISO 18273 for applications in electro technical and mechanical construction, food, and chemical industry.
Açıklama
Diğer Bilgiler
İlgili ürünler
UTP 48
UTP 48 contains 12% Si for welding of aluminium alloyed with copper, silicon, and magnesium. Also excellent for joining dissimilar grades of aluminium. Unique self-lifting slag. Pure white coating outlasts conventional products in moisture resistance. Available in hermetically sealed aluminium tins.
Union AlCu 6 Mn
Solid wire for GMAW of AlCu alloys. Provides higher strength and better ductility than AlSi filler alloys when welding AlCu alloys. Superior resistance to stress corrosion cracking where high-temperature properties are required. Thorough cleaning of the workpiece bevels is necessary prior to welding.
Union AlSi 10 Cu 4
Solid wire for GMAW of AlCu alloys. Low melting point and excellent penetration characteristics. Provides superior wetting characteristics compared to Union AlCu 6 Mn when welding AlCu alloys, the strength, on the other hand, is lower. Superior resistance to stress corrosion cracking where high-temperature properties are required. The weld metal is not suitable for anodizing for decorative purposes. Thorough cleaning of the workpiece bevels is necessary prior to welding.
UTP 49
UTP 49 for welding of aluminium alloyed with manganese and magnesium. Also excellent for joining dissimilar grades of aluminium. Suitable for seawater applications. Unique self-lifting slag. Pure white coating outlasts conventional products in moisture resistance. Available in hermetically sealed aluminium tins.
Union AlMg 5 Mn (solid)
Solid wire for GMAW of AlMg alloys containing up to 5% Mg. Seawater-resistant weld metal. Susceptible to stress corrosion cracking if exposed to service temperatures > 65°C. Good colour matching with base metal after anodizing. Thorough cleaning of the workpiece bevels is necessary prior to welding.
Değerlendirmeler
Henüz değerlendirme yapılmadı.