Böhler Diamondspark X70 RC-Pipe
Flux-cored wire, low-alloy, creep-resistant
Standard
- EN ISO 17634-A
- EN ISO 17634-B
- AWS A5.29 / SFA-5.29
- AWS A5.36 / SFA-5.36
T CrMo1 P M21 1 H10
T 62 5 T1-1M21A-N3M1-UH5
E91T1-K2M-JH4
E101T1-M21A4-K2-H4
Class
FOXcore CM 2 RC welding consumable is a rutile-cored, low-alloy filler wire primarily designed for welding creep-resistant base materials (such as 10CrMo9-10) containing 2.25% Cr and 1% Mo. These types of materials are used in the manufacture of high-pressure vessels and piping systems.
Thanks to its fast-solidifying slag system, this cored wire offers excellent positional welding characteristics and allows for high travel speeds. The cored wire is suitable for welding with standard power sources under a mixed gas shield (82% Ar + 18% CO₂) in direct current with the electrode in the positive (DC+) polarity.
cast steels
Wear-resistant steels and similar alloyed cast steels, as well as similar alloyed case-hardened steels and nitriding steels with tensile strengths up to 980 MPa:
- 1.7380 – 10CrMo9-10
- 1.7276 – 10CrMo11
- 1.7281 – 16CrMo9-3
- 1.7383 – 11CrMo9-10
- 1.7379 – G17CrMo9-10
- 1.7382 – G19CrMo9-10
is a basic-coated, core-wired alloyed covered electrode designed for shielded metal arc welding (SMAW). The 9Cr-1Mo weld metal exhibits a fully tempered martensitic microstructure with suitable mechanical properties after post-weld heat treatment.
- A 182 Gr. F22
- A 213 Gr. T22
- A 234 Gr. WP22
- A 335 Gr. P22
- A 336 Gr. F22
- A 426 Gr. CP22
Typical Chemical Analysis
Gas: Possible,
|
Component |
Weight % |
|
C |
0.08 |
|
Ni |
0.25 |
|
Mon |
0.8 |
|
Feature |
2.25 |
|
Mon |
1.1 |
|
P |
< 0.005 |
|
Sb |
< 0.005 |
|
Zn |
< 0.005 |
|
As |
< 0.005 |
Mechanical Properties of the Base Metal
(Typical values / minimum values)
|
Feature |
Yield Strength: Rp0.2 (MPa) |
Tensile Strength, Rm (MPa) |
Elongation A % (L0=5d0) |
Condition |
|
20°C (s) |
600 (≥ 540) |
700 (≥ 620–760) |
19 (≥ 18) |
70 (≥ 47) |
|
20°C (s1) |
650 (≥ 540) |
730 (≥ 620–760) |
19 (≥ 18) |
50 (≥ 47) |
Condition: Gerilim giderilmiş, 720°C / 2 saat – Koruyucu gaz Ar + %18 CO₂
s1: Gerilim giderilmiş, 690°C / 1 saat – Koruyucu gaz Ar + %18 CO₂
Electrode Diameter (mm)
- Work Data T 42 4 B C1 3 H5
- Current Terminal: 1.2 mm
- Re-drying: Possible, 150°C / 10 hours
- Inert Gas (EN ISO 14175): Possible,
Welding is performed in DC+ polarity using a standard GMAW power source.
Approvals
- TÜV (11812)
- Class
Date:
Verilen tüm bilgiler dikkatli inceleme ve yoğun araştırmaya dayanmaktadır.
Bununla birlikte, bilgilerin doğruluğu konusunda herhangi bir sorumluluk kabul edilmez ve bilgiler önceden haber verilmeksizin değiştirilebilir.
Date: 03/2021
Website: Metal-powder-filled wire, structural steel
Related products
Böhler Diamondspark 46 MC
Flux-cored wire, seamless, unalloyed steel, basic type
Standard
|
Features and Typical Applications |
||
|
EN ISO 17632-A |
||
|
EN ISO 17632-B |
||
|
AWS A5.20 / SFA-5.20 |
||
|
AWS A5.36 / SFA-5.36 |
||
|
EN ISO |
Classifications |
|
|
T 46 3 M M21 1 H5 |
E70C-6M H4 |
|
|
T 49 3 T15-1M21A-UH5 |
E71T1-C1A2-CS1-H4 |
|
|
T 46 3 P C1 1 H5 |
E70T-5C JH4 |
|
|
T 49 3 T15-1M20A-UH5 |
E70T1-C1AZ-CS1-H4 |
|
Böhler Diamondspark X60 RC-Pipe
Metal-core wire, seamless, low-carbon steel
Standard
|
Features and Typical Applications |
Classifications |
|
EN ISO 17632-A |
T 3 T Z M M21 1 |
|
EN ISO 17632-B |
T ZCrWMo9VNb P M21 1 H5 T 69 T1-1M21-G-H5 E91T1-B92M-H4 |
|
AWS A5.18 / SFA-5.18 |
E71T-5M JH4 |
|
EN ISO 17632-A |
590 MPa (550–680) |
|
EN ISO 17632-B |
T 49 3 T1-1M21A-H5 |
|
AWS A5.18 / SFA-5.18 |
E70C-6M H4 |
Böhler FOXcore C 9 MV MC
single-pass or multi-pass welding
Standard
- EN ISO 17632-A
- EN ISO 17632-B
- AWS A5.28 / SFA-5.28
- T 46 6 Z B M21 3 H5
- T 69 T15-1G-9C1MV
- E80T5-GM H4
Features and typical applications
Dikişsiz, Nikel-Bakır alaşımlı, Ar-CO₂ koruyucu gaz ile korozyona dayanıklı çeliklerin tek paso veya çok pasolu kaynağı için metal özlü tel.
Öne çıkan özellikleri: yüksek verim, iyi kaynaklanabilirlik, mükemmel dikiş görünümü, düşük sıçrama kaybı ve düşük sıcaklıklarda olağanüstü mekanik özellikler.
Bu tel özellikle -60 ºC Weight % Metal-core wire, high-alloy, creep-resistant için uygundur.
Böhler FOXcore P 92 RC
Böhler Diamondspark X80 RC-Pipe
Flux-cored wire, seamless, resistant to atmospheric corrosion, rutile type
Standard
- EN ISO 17634-B
- AWS A5.28 / SFA-5.28:
- Low bounce losses
- Easy-to-clean slag
Class
FOXcore C 9 MV MC, yüksek sıcaklıkta çalışan, sürünmeye dayanıklı martenzitik Flux-cored wire, seamless, for automatic pipeline welding, rutile type için geliştirilmiş bir metal özlü kaynak telidir. Türbin ve kazan imalatında ve kimya endüstrisinde kullanılır. Özellikle ASTM T91 / P91 steels için tasarlanmıştır.
Optimum tokluk değerleri elde edebilmek için Classifications oluşturan bir kaynak tekniği uygulanmalıdır. Ayrıca kullanılan -60 ºC, tokluk değerleri üzerinde belirleyici bir etkiye sahiptir.
Böhler Diamondspark 53 RC
Core wire, seamless, mild steel, rutile
Standard
- EN ISO 17634-A
- EN ISO 17634-B
- AWS A5.29 / SFA-5.29
T ZCrMo9VNb P M21 1 H5
T 69 T1-1M21-9C1MV-H5
E91T1-B91M-H4
Class
FOXcore C 9 MV RC, türbin, kazan ve boru tesisatı imalatında ve döküm sanayinde kullanılan, sünmeye dayanıklı, temperlenmiş %9 kromlu çeliklerin kaynağı için geliştirilmiş Classification. Tel, özellikle ASTM T91 / P91 steels için tasarlanmıştır.
Bu özlü tel, seamless flux-cored wire için uygundur. Ürünün kimyasal bileşimi for automatic pipeline welding gerekliliklerini karşılar; yani (Ni + Mn) < %1 (ağırlıkça).

Reviews
There are no reviews yet.